EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is actually a extremely economical photo voltaic controller suitable for off-grid solar programs. According to multiphase synchronous rectification engineering, it makes sure optimized energy conversion and method stability for an array of photovoltaic (PV) programs.
Critical Features on the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller know-how for excellent solar energy harvesting. Vital attributes incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Sophisticated MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for Improved battery lifetime.
Liquid crystal display Display screen with real-time information monitoring.
Many Load Command Modes together with handbook and timer.
Complete Electronic Protections from overcharging, in excess of-discharging, small circuits, and reverse polarity.
Step-by-Phase Information to Starting the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Make sure all elements are involved: Tracer AN device, temperature sensor, interaction cables, and user manual.
Verify the model amount and voltage ratings match your solar panel and battery requirements.
2. Mounting the Cost Controller
Choose a nicely-ventilated, dry spot near the battery financial institution.
Safe the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Constantly stick to appropriate protection protocols and ensure the system is driven off prior to connecting factors.
Phase 1: Hook up the battery terminals on the charge controller (positive to beneficial, adverse to adverse).
Stage two: Link the photo voltaic panel array on the PV input terminals.
Move 3: Connect the load terminals if employing a immediate load connection.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power to the controller by connecting the battery initially.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Series supports serious-time monitoring utilizing the MT50 remote meter.
Info is usually logged by way of the RS485 interaction port utilizing software for example Photo voltaic Station Computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Challenge 1: No Ability Output
Verify More info battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Around-Voltage Protection
Verify the solar array’s voltage rating.
Alter procedure parameters if essential.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT configurations in the menu.
Advantages of the Tracer AN Collection with MSR Technological know-how
The multiphase synchronous rectification technological innovation makes certain:
Higher Efficiency: Lowered Electricity losses during conversion.
Increased Trustworthiness: Secure general performance under variable masses.
Extended Battery Everyday living: Constant and correct charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological innovation is really an Remarkable option for optimizing solar energy technology and increasing battery lifetime. By next the above mentioned set up tutorial, buyers can assure utmost effectiveness and program longevity.